收藏本站
4. Development Board Setup
Introduction
The instructions in this chapter explain how to set up the Stratix IV GX FPGA
development board.
Setting Up the Board
To set up and power up the board, perform the following steps:
1. The Stratix IV GX FPGA development board ships with its board switches
preconfigured to support the example designs in the development kit. If you
suspect your board might not be currently configured with the default settings,
follow the instructions in “Factory Default Switch Settings” on page 4–2 to return
the board to its factory settings before proceeding.
2. The development board ships with example designs stored in the flash memory
device. Verify the rotary switch (SW2) is set to the 0 position to load the design
stored in the factory portion of flash memory. Figure 4–1 shows the rotary switch
location on the Stratix IV GX FPGA development board.
3. Connect the SDI HSMC to the host board by performing the following steps:
a. Attach two standoffs at the corners of the SDI HSMC opposite the HSMC
connector. Place the standoffs under the board and hand-fasten screws from
the top through the holes adjacent to the AES audio BNC connectors J15 and J3.
b. Connect the J19 connector on the SDI HSMC to the J1 connector on the host
board. The host connector is labeled HSMC Port A and is the left connector on
the host board.
c. For added stability, optionally screw the two boards together using standoffs
and the mounting holes common to both boards.
d. Connect two SMA cables of equal length from J17 and J18 on the SDI HSMC to
J14 and J15 on the host board. This connection supplies the SDI HSMC
reference clock to the host board.
f
For information about the SDI HSMC, refer to the SDI HSMC Reference
Manual .
4. Connect the DC adapter (+16 V, 3.75 A) to the DC power jack (J4) on the FPGA
board and plug the cord into a power outlet.
c
Use only the supplied power supply. Power regulation circuitry on the
board can be damaged by power supplies with greater voltage.
5. Set the POWER switch (SW1) to the on position. When power is supplied to the
board, a blue LED (D24) illuminates indicating that the board has power.
? November 2009
Altera Corporation
Audio Video Development Kit, Stratix IV GX Edition User Guide
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
DKUSB-1 KIT DEV FOR MB86065
DLD101-7 IC LED DRIVER HP CONST CURR 8DFN
DLP-2232H-PSOC5 MODULE PSOC5 USB ADAPTER FT2232H
DM163014 BOARD DEMO PICDEM4 12F629,16F630
DM163022-1 BOARD DEMO PIC16F87X PIC18FXX2
DM163030 KIT DEV PICDEM LCD2
DM163035 KIT DEVELOPMENT PICDEM LAB
DM164120-1 BOARD DEMO PICKIT 2 LP COUNT
相关代理商/技术参数
DKWF111 功能描述:WiFi/802.11开发工具 WF111 SDIO Eval kit RoHS:否 制造商:Roving Networks 产品:Evaluation Boards 工具用于评估:RN-171 支持协议:802.11 b/g 频率:2.4 GHz 接口类型:UART 工作电源电压:2 V to 16 V
DKWF121 功能描述:WiFi/802.11开发工具 WF121 Dev Kit RoHS:否 制造商:Roving Networks 产品:Evaluation Boards 工具用于评估:RN-171 支持协议:802.11 b/g 频率:2.4 GHz 接口类型:UART 工作电源电压:2 V to 16 V
DKWT32I 功能描述:BLUETOOTH DEVELOPMENT KIT 制造商:silicon labs 系列:- 零件状态:有效 类型:收发器; 传统蓝牙? 频率:2.4GHz 配套使用产品/相关产品:WT32i 所含物品:板 标准包装:1
DKXC5VADAPT-1 功能描述:DAC DK FPGA ADAPTER BOARD RoHS:是 类别:编程器，开发系统 >> 配件 系列:- 标准包装:1 系列:- 附件类型:适配器板 适用于相关产品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
DKYRITRPDR2B30 制造商:OMRON AUTOMATION AND SAFETY 功能描述:TEXAS INSTRUMENTS V640RFID TAG
DKY-RI-TRP-DR2B-30 制造商:OMRON AUTOMATION AND SAFETY 功能描述:TEXAS INSTRUMENTS V640RFID TAG 制造商:Omron Electronic Components LLC 功能描述:TI V640RFID tag 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Texas Instruments V640RFID tag
DK-Z7-VIDEO-CES-G 制造商:Xilinx 功能描述: 制造商:Xilinx 功能描述:ZYNQ-7000 VIDEO AND IMAGING KIT 制造商:Xilinx 功能描述:IMAGING / VIDEO KIT ZYNQ-7000 制造商:Xilinx 功能描述:IMAGING / VIDEO KIT, ZYNQ-7000
DK-Z7-VIDEO-CES-G-J 制造商:Xilinx 功能描述:ZYNQ-7000 VIDEO/IMAGE KIT JAPAN